Iwata Air Gunza AZ3 H.T.E 2 Gravity Spray Gun

Iwata's Air Gunza AZ3 H.T.E 2 Gravity Spray Gun is a high transfer efficiency centre post gravity feed gun. It is a great choice when looking at affordability and technicality. The re-modelled AZ3 H.T.E 2 features a separation of the air control and the air hose, as well as, a newly designed air cap and a polished body for easier cleaning and maintenance.

The gun models: A new lightweight design, excellent maneuverability, high transfer efficiency, fine atomisation, a clean Teflon-coated body and a new concept multi-hole air cap. It also features a PTFE Teflon Needle Packing and is ideal for waterborne coatings with its stainless steel needle and nozzle. It's ergonomic spray gun design with the new trigger helps in relieving stress on painting, while the body is lightweight and well-balanced body with the head being 20-50g lighter than the previous model.

The AKULON cup is an improved paint cup with multi-thread construction. It sprays a uniformly shaped spray pattern with a wetter core, even with higher viscosity coating.

Kit includes spray gun head and gravity pot. 

Multiple size setups available:

1.3mm:

• Suits all colour coat applications including metallic basecoat, both solvent and water
• Nozzle Size [mm]: 1.3
• Air Pressure @ Gun Inlet [bar]: 2
• Air Consumption [l/min]: 200
• Fluid Output [ml/min]: 140
• Fan Pattern [mm]: 240
• Pot type/size: PCG.6AG
• Capacity [ml]: 600

1.5mm:

• Suits higher build application of non-metallic colours, can be used for lower build primers. Also white spirit DuLux type wood vanishes.
• Nozzle Size [mm]: 1.5
• Air Pressure @ Gun Inlet [bar]: 2
• Air Consumption [l/min]: 200
• Fluid Output [ml/min]: 160
• Fan Pattern [mm]: 260
• Pot type/size: PCG.6AG
• Capacity [ml]: 600

1.8mm:

• Suits primer application. Also suits emulsion application.
• Nozzle Size [mm]: 1.8
• Air Pressure @ Gun Inlet [bar]: 2
• Air Consumption [l/min]: 205
• Fluid Output [ml/min]: 250
• Fan Pattern [mm]: 300
• Pot type/size: PCG.6AG
• Capacity [ml]: 600ml

2.5mm:

• Suits polyester spray filler and very high build / unthinned primer application. Also suits heavy build masonry / textured.
• Nozzle Size [mm]: 2.5
• Air Pressure @ Gun Inlet [bar]: 3
• Air Consumption [l/min]: 279
• Fluid Output [ml/min]: 450
• Fan Pattern [mm]: 360
• Pot type/size: PCG.6AG
• Capacity [ml]: 600

3.0mm:

• Nozzle Size [mm]: 3
• Air Pressure @ Gun Inlet [bar]: 3
• Air Consumption [l/min]: 288
• Fluid Output [ml/min]: 560
• Fan Pattern [mm]: 400
• Pot type/size: PCG.6AG
• Capacity [ml]: 600

3.5mm:

• Suits liquid metals, tars, and very viscous products.
• Nozzle Size [mm]: 3.5
• Air Pressure @ Gun Inlet [bar]: 3
• Air Consumption [l/min]: 307
• Fluid Output [ml/min]: 600
• Fan Pattern [mm]: 420
• Pot type/size: PCG.6AG
• Capacity [ml]: 600

For the product manual, you can find it here. If you are after the parts list you can find it here. For a look at the product in action and a review, you can check out The Gunsman's YouTube video below! If you have any other questions or want to discuss this product in more depth feel free to contact us at your nearest store or call our Head Office on 02 4721 3301.